Grammer MSG 90.6PG - Page 405

Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.49 Cable harness for backrest – removal and installation
(seat with climate control system)
Page 5 of 8
REMOVAL / INSTALLATION TABLE OF CONTENTS
7 Disconnect the electrical connection
between the cable harness for
backrest and control module for
climate control system (see
Chapter 3.53).
Removal and installation
8 Mark the points where the cable
harness for the backrest (1) is
attached to the backrest heater cable
(3) and to the microphone cable (2) by
means of two cable ties (4) and
remove the cable ties (4).
9 Mark the points where the cable
harness for the backrest (1) is
fastened to the air hoses (14) with two
cable ties (12) and remove the cable
ties (12).
1
12
11
1
K
H
I
J
L
14
13
10
9
8
6
7
8
7
20
1
17
19
18
M
1
4
4
5
16
2
3
16
3
1
1
15
12
J
H
I
2
2545