To Next PageTo Next Page
Need help?Do you have a question about the GRAND EFFECTS 100-M and is the answer not in the manual?
General| Brand | GRAND EFFECTS |
|---|---|
| Model | 100-M |
| Category | Outdoor Fireplace |
| Language | English |
Specifies natural/propane gas types and operating pressures (7" wc, 11" wc).
Details required gas flow for the burner system (60,000-80,000 Btu/hr).
Unit must be used outdoors, away from combustible materials like wood, fuels, or dry vegetation.
Installation requires a licensed contractor and adherence to local/national codes (NFGC ANZI Z223.1).
Install upstream gas valve within 5ft, maintain good piping, avoid flexible gas lines.
Secure mounting bracket to wall, center bowl, bend prongs to secure.
Connect 90 elbow and gas hose to burner assembly, ensure level positioning.
Critical importance of mounting bracket for proper cooling and drainage functions.
Follow safety rules: detect gas leaks, avoid flammables, ensure supervision, and use in suitable conditions.
Ensure the area is clear of combustibles and check for gas leaks before operating the unit.
Adjust flame height to 10"-12", light burner, and turn off by closing the gas valve.
Notes on using lava rock or glass, with specific warnings for propane installations and lava rock.
Periodically clean the burner assembly with a wet cloth to remove carbon build-up.
Periodically inspect the underside of the burner assembly for signs of excessive temperatures.
Ensure all gas connections are tight to prevent leaks.
