Grand PATIO NAPOLI User Manual

NAPOLI HANGING UMBRELLA WITH BIG BASE
1-16
There are two installation methods for this product. If you are using a thick umbrella stand as shown in
the figure, please use this manual.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
This item is heavy. Use care when handling. May require two adults for safe assembly.
Assemble the items on a stable, non-abrasive surface such as carpeting to avoid damage.
CARE AND MAINTENANCE
Use mild soap and warm water. Do not use abrasive materials, cleaners or bleach products. Rinse with
clean water and dry thoroughly.
Water allowed to accumulate inside the frames could freeze and damage the frame tubing.
Such damage is not covered under the warranty.
During inclement weather conditions and winter period, please close the umbrella and store it in a dry
area. A matching umbrella cover is strongly recommended to extend the usage life-span.
!
READ & SAVE BELOW INSTRUCTIONS

Grand PATIO NAPOLI Specifications

General

Brand	Grand PATIO
Model	NAPOLI
Category	Patio Furniture
Language	English

Summary

Important Instructions and Safety

Installation and Handling Precautions

Provides guidance on installation methods, parts check, safe handling of heavy items, and proper assembly surfaces.

Care and Maintenance Guidelines

Details cleaning procedures, frame protection from freezing water, and storage advice for inclement weather.

Package Contents

Component Identification

Lists and illustrates all main parts (A-H, S) included in the package, with quantities and a note on carton contents.

Hardware Contents

Hardware Components List

Identifies and quantifies all necessary hardware (K-T) for assembly.

Assembly Instructions

Base Frame and Pole Assembly

Steps 1-4 guide assembling the base frame, attaching the pole mount, installing wheels, and inserting the pole.

Base Filling and Securing

Steps 5-7 focus on securing the base, filling it with water/sand to 264LBS, and tightening the cap.

Arm and Canopy Assembly

Steps 8-11 cover attaching the support arm, connecting the umbrella canopy, and finalizing arm connections.

Operation Instructions

Opening, Tilting, and Adjusting the Umbrella

Details the steps for opening, tilting, and adjusting the umbrella canopy using its mechanisms.

Retracting and Securing the Umbrella

Instructions on how to properly retract the umbrella and secure it with the provided strap.

Positioning, Rotation, and Moving

Guides on rotating the umbrella, handling the base, and moving the entire unit safely.

Care Instructions

Weather Protection and Storage

Advises on protecting the umbrella from wind and storing it properly during adverse weather.

User Safety and Precautions

Warnings against leaving the umbrella unattended and using the base as a step.

Umbrella Cloth Replacement

Step-by-Step Cloth Replacement Guide

Comprehensive instructions with illustrations for replacing the umbrella cloth.