Setup Wizard
The setup wizard shows at first access to DP Handset or factory reset allowing users to configure handset language and
date/time. Users can quit at any time by pressing “Skip” (left softkey).
Register DP Handsets to DP Base Station
1.
On the DP75x Base station, for example, press and hold the Radio/Page button for 8 seconds until the Radio
icon starts blinking to start the Subscription process. Or Access the web UI, and press the Subscribe icon to Open the
Subscription.
2. On the DP Handset, press the “Subscribe” softkey if available on the main screen or access Menu 🡪 Registration 🡪
Registerwhile the DP75x Radio icon is blinking.
Note: The “Subscribe” softkey appears only if the DP Handset is not registered to any DP75x base station.
3. Select BaseX (X=1-4) corresponding to the desired base station DP75x, then press Subscribe.
4. The DP Handset will search for nearby base stations and will display the RFPI code and Base station name of the
discovered DP75x.
5. Press Subscribe to pair with the displayed DP75x.
6. The DP Handset will display Easy Pairing on the LCD and play an audible buzz when successful. Then it will return to the
home screen, displaying the Handsets name and number assigned by the registered base station.
Registration Process
Using DP Handset with Multiple DP Base Stations
DP Handset can be registered to up to four different DP base stations.
Registering DP Handset to an additional DP base station
Considering DP Handset is previously registered to an initial base station, please follow the below steps to register a Handset
to an additional base station:
1. Press Menu (left softkey or the selection key) to bring up the operation menu.
2. Use the arrow keys to reach Registration and select Register.
3. Navigate to an unsubscribed base using arrow keys, and click on Subscribe.
4. Make sure that the subscription is opened on the new base station.
To Next Page
Loading...
Need help?
General
