Grandstream Networks DP730 User Manual

Unregister DP Handset from DP75x web UI
Setting the Key Lock
You can lock the keypad against unintentional entries. It is, however, still possible to pick up incoming calls even with the
keypad locked.
To enable the Keypad Lock
1.
Press the Pound key “#” and hold for approximately 2 seconds.
2. The display shows Keypad Locked briefly and the key lock icon appears in the display.
To disable the Keypad Lock
1.
Press and hold the Pound key “#” to unlock the keys.
2. Keypad Unlocked appears briefly in the display and a window prompt will be displayed to confirm that the keypad is
unlocked.
Locating a DP Handset from the DP Base station
In some situations, you may have a DP Handsets incorrectly positioned and you don’t know its current location. You can locate
a DP Handsets from his registered DP75x base station using the below steps:
Locate via DP Base station Web UI
1. Access the Web GUI of your DP75x using the admin’s username and password.
2. Press Login to access your settings and navigate to the Status 🡪 DECT Base Status tab.
3. Choose which Handsets to locate and press the corresponding Page button.
4. A paging call will be received on the selected DP Handsets.
Note: If you press the Page All icon , all registered DP Handsets will be receiving paging calls.
5. Once located, you can press the End Softkey on the DP Handset to end the paging call.

Grandstream Networks DP730 Specifications

General

Brand	Grandstream Networks
Model	DP730
Category	Cordless Telephone
Language	English