Grandstream Networks DP730 - System Configuration and Advanced Settings; Menu, Timeout, and SIP Registration

Change Menu and LCD Timeout
1. Press Menu to bring up the operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to Display, and then press “Select” (left softkey).
4. Set desired time in seconds for Backlight timeout and for Menu timeout. Available value: 15 seconds, 30 seconds, 60
seconds or disabled. (Default is disabled)
5. Press Save (left softkey) to save and apply the new settings.
Return to Idle Screen
Press the Power Key to quickly exit the menu and return to the main idle screen.
If you do not press any key in a period of time, the LCD screen will automatically exit the menu and return to the idle screen as
well.
When you are navigating on the handset’s menu, and you receive an incoming call, the LCD screen will automatically exit the
menu and you can either accept or reject the call. When the call is terminated, the LCD screen will return to the idle screen.
Register SIP Account
Register Account via Web User Interface
1. Access the Web GUI of your DP75x using the admin’s username and password.
2. Press Login to access your settings, navigate to the Accounts tab, and select an account to use.
Note: DP75x supports up to 20 accounts. An account is a set of settings including general settings, network settings, SIP
settings, audio settings, call settings, ring tones, etc.
3. In General Settings, set the following:
Account Active to Yes.
SIP Server field with your SIP server IP address or FQDN.
Failover SIP Server with your Failover SIP Server IP address or FQDN. Leave empty if not available.
Prefer Primary SIP Server to No or Yes depending on your configuration. Set to No if no Failover SIP Server is
defined. If “Yes”, the account will register to Primary SIP Server when failover registration expires.
Outbound Proxy with your Outbound Proxy IP Address or FQDN. Leave empty if not available.
SIP User ID: User account information, provided by the VoIP service provider (ITSP). Usually in the form of digits
similar to a phone number or actually a phone number.
Authenticate ID: SIP service subscriber’s Authenticate ID is used for authentication. Can be identical to or different
from the SIP User ID.
Authenticate Password: SIP service subscriber’s account password to register to the SIP server of ITSP. For security
reasons, the password field will be shown as empty.
Name: Any name to identify this specific user.
4. Press Save and Apply to save your configuration.