Firmware Upgrade
Reboot DP Base Station
1. Press Menu to bring up the operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to select Settings 🡪 System Settings and choose Reboot Base.
4. Enter the Base PIN code (by default the PIN code is: 0000).
5. The LCD screen will display a prompt message to confirm rebooting the base station, press “Yes” (left softkey) to confirm
or press “No” (right softkey) to cancel.
Rebooting the Base Station
Reset DP Handsets
The users can reset the new settings made on the handsets after performing a factory reset. To reset your handsets to the
default settings:
1. Press Menu to bring up the operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to select Settings 🡪 System Settings and choose Factory Reset.
To Next Page
Loading...
