4.
To terminate the call, press the Hang-Up key .
During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing operation by pressing
the on-hook key. During the call conversations, you can press the left and right navigation keys to adjust the volume. The call
duration is displayed on the LCD screen while the call is in progress and the call summary will be displayed once the call is
terminated.
Dialing from Call history
Users may use their call history entries to initiate calls.
1. Press Menu to bring up the operation menu.
2.
Use arrow keys to reach the Call History icon and then press “Select”.
3.
Select the desired entry, then press the Dial key to establish the call.
Note: In step 3, users can press the “Options” softkey followed by the “Edit Dial” option to initiate the call.
The call history list stores the last dialed phone numbers. When the memory of the redial number list is full, the handsets will
automatically erase the oldest dialed number when a new number is dialed
Dialing from Phonebook
Users may use their private or shared contacts to initiate calls.
1. Press Menu to bring up the operation menu.
2. Press Contacts to access the phonebook menu.
3. Select the contact to call.
4.
Press Dial Key to initiate the call.
Note: In step 4, users can press the “Options” softkey followed by the “Edit Dial” option to initiate the call.
Intercommunication
Users may make phone calls between different handsets directly without remembering each user’s phone number.
1. Go to Handset GUI -> Shortcut
2. Configure a navigation key (up, down, left, or right key) to “Intercom”.
3. Press the key just configured at the idle state.
4. Choose the handset name that you want to call.
Note
To dial “+” please keep pressing the “0” key for about 2 seconds.
To dial from the contacts list, choose a contact using the navigation keys and press the Dial key.
Note
Redialing can be performed via the pound key “#” when configured accordingly.
To Next Page
Loading...
