Shortcut Setting
Answering Calls
When receiving an incoming call, you can answer the call using the following steps:
Earpiece mode:
Press Dial Key to pick up the call, or “Accept” softkey (left softkey).
Speakerphone mode:
Press Speaker Key to pick up the call.
Headset mode:
Press Dial Key to pick up the call, or the “Accept” softkey using a connected headset.
Auto Answer
Users can enable the Auto Answer feature to accept and automatically answer incoming calls.
If enabled, DP Handsets will automatically answer incoming calls using speaker mode.
To activate/deactivate the auto answer feature:
Using DP Handsets Menu
1. Press Menu to bring up the operation menu.
2. Select Preferences 🡪 and navigate to Auto Answer using the up/down arrow keys.
3. Switch between Enabled/Disabled using the left/right arrow keys and “Save” after Enabling / Disabling the option.
Using DP75x Base Station Web Interface
1. Access DP75x Base Station Web Interface.
2. Go to DECT 🡪 Handsets Settings 🡪 HS# Settings.
3. Set “Enable Auto Answer” to “Yes”. (By default, set to “No”).
Off-Cradle Pickup
Notes
To answer an incoming call during an established call, press Dial Key , or the Speaker Key , or the “Answer”
softkey. The incoming call is answered, and the original call is placed on hold.
You can switch off the ringer temporarily by pressing Silent softkey.
To Next Page
Loading...
