Grandstream Networks GDS371 Series - Page 42

Notes:
If “Disable Keypad SIP Number Dialing” is checked, users will be able to open door usingLocal PIN with
following sequence [Local PIN] .
● Card & Private PIN: Means every member needs to swipe his card and enter his private PIN to open the
door using the following sequence[Swipe the card +* Private PIN#]
Note : This feature is available to be congured only on the GDS3710 Model.
Local PIN to Open the Door
Congures PIN stored in GDS3710, input locally this PIN on the GDS3710 keypad will unlock the door.
This feature needsPrivate PIN, means every member has a private PIN, the GDS will record who unlocked the
door every time.
Users need to enter the following sequence from the GDS3710 to open the door [*Virtual Number*Private
PIN#].
Note: When local PIN type is set to private card PIN, users can also open the door by swiping their cards.
Local PIN to Open Door Schedule
Congure a schedule for the Local PIN to open the door. Once congured, the door opening ability using a
local PIN with turn ON/OFF based on a congured schedule. The default setting is “All Day”.
Enable DTMF Open Door
When enabled, remote SIP phones can open the door while in call by entering the remote PIN code congured
(the PIN code is sent via DTMF). Default settings is disabled.
Enable Guest PIN Enables password entry for guests.
Guest PIN Congures the password that will be used by guests.
Guest PIN Start Time Selects the start time when the Guest PIN start to take effect.
Guest PIN End Time Selects the end time when the Guest PIN will stop working.
DisableAuto Answer
If checked, GDS3710 will not answer incoming calls automatically, users can press any key to answer the call.
Default setting in unchecked.
Enable Doorbell Button to Hang up
Call
If checked, Users can hang up an active call when pressing the doorbell button. Enabled by default.
Disable Keypad (except the Doorbell
Button)
When checked the Keypad will be disabled, only Door Bell button can be pressed.
Enable On Hook After Remote Door
Opened
When checked calls will be disconnected automatically after the remote open door event.
Onhook Timer After Remote Open
Door(s)
Denes the duration in seconds when the calls will be disconnected after the remote open door event.
The valid range is 3-1800
The default value is 3 seconds.
Enable HTTP API Remote Open Door Enabling this option allows to use HTTP API command to open the door remotely.
● Disable:to disable the option.
● Challenge + Response Authentication:this option allows the use of a multi-step method to authenticate
● Basic Authentication:this option uses a simple request to authenticate:
1. Open the door command example:
https://admin:password@192.168.23.123/goform/apicmd?remotepin=12345&type=1
2. Close the door command example:
https://admin:password@192.168.23.123/goform/apicmd?remotepin=12345&type=2
Important note:We will not be responsible for any security problems resulting from opening the HTTP API
remote function, this option is disabled by default and the user should enable it while knowing how to mitigate
the risk.