Grandstream Networks GDS371 Series - Page 43

Note: The option to send PIN via Wiegand when HTTP API open door executed is added on the new rmware
upgrade for the GDS3710 Model.
HTTP API Open Door Compatibility
Mode
If this option is enabled, HTTP API Open Door will be supported under HTTPS mode.
Disabled by Default.
Disable Keypad SIP Number Dialing
When Keypad SIP number Dialing disabled, device will interpret each digit entry as private-password open door
request after pressing #.
Notes:
● “Local PIN Type” should choose “Private PIN”.
● Dial keypad to make SIP call will NOT work (except for doorbell button call).
● Private PIN must beUNIQUEamong users, otherwise the door will still open but log will NOT tell who
opened the door due to duplicated PIN and whoever user last matched in the database with the Private
PIN will be shown in the log.
Enable Card Issuing Mode
Enables RFID card issuing/program into the GDS3710. When selected sweeping an RFID card into the
GDS3710 will add card information into.
Card issuing State Expire Time(m)
Card issuing mode will be automatically disabled when timer reached (The range of value is 1 – 1440, in
minutes).
Enable Key Blue Light When checked, the blue light will be activated when pressing the GDS3710 Keys.
Enable Background Light When checked, the background light will turn on once clicking the GDS3710 Keys.
Blue Light Brightness(Time Interval)
This bar adjusts the brightness when blue LED is congured to light up at congured On/Off intervals.
The valid range is 1-255, the default value is 90
Blue Light Brightness(Key Pressed)
This bar adjusts the brighness of blue LED when keypad is pressed.
The valid range is 1-255, the default value is 90
Enable Doorbell Blue Light
When enabled, Doorbell LED will light based on the congured Start/End Time. For instance, this option can be
used when GDS is deployed on dark environment, the GDS will be located easily using Doorbell LED.
Enable Keypad Blue Light
When enabled, Keypad LED (except for Doorbell LED) will light based on the congured Start/End Time. For
instance, this option can be used when GDS is deployed on dark environment, the GDS will be located easily
using Keypad LED.
Central Mode
If enabled, Group/Schedule/Holiday can only be synchronized from the Central (GDS Manager), local
conguration will not be allowed.
If disabled, only local conguration from GDS3710 is allowed.
Key Sensitivity Level
Set the sensitivity level:
● Default: with this mode, the GDS3710 is using less sensitivity keypad parameters which applied to most
usage scenes, especially in warm and high humidity places like tropic regions or places near seaside or
riverside wherehigh humidity weather condition exists, especially in Summer.
● High:This option is designed for application scenes located in high latitude regions normally very cold and
user might need to press the keypad with gloves. Due to the sensitivity is high, false positive might happen
if such parameter used in different place like low latitude environment.
Notes:Most application scenes the Default setting of this rmware is good enough for application. Please use
Default setting unless the usage scene really needs high keypad lever sensitivity.
If with default or low sensitivity keypad, the false-positive ghost call issue still happens frequently, which might
indicate inappropriate wiring or installation, or maybe the hardware is faulty. Please contactOur Grandstream
Support for assistance to resolve such a problem.
Key Tone Type Congures the key tones for the GDS3710.
● Default: Beeps will be played when pressing the GDS3710 keys.