GHP62X Package Content
Note
Please check the package before installation. If you find any one of the components missing, please contact your system administrator.
GHP6XX/W Phone Setup
The GHP6XX/W can be installed on the desk or can be mounted on the wall. To mount the phone on the wall please follow the instructions below.
GHP61X/W
GHP61X Wall Mount
Mark two dots horizontally with a 100 mm distance in between where to wall mount the GHP610/W & GHP611/W.
Using a drill, make a hole on each marked dot. Put a plastic expansion bolt and screw (not provided) on each hole. Leave enough space to
mount the GHP610/W & GHP611/W.
Mount the GHP610/W & GHP611/W on the screws using the Wall Mount Slots.
GHP62X/W
GHP61X Wall Mount
1.
On the wall where the GHP62X/W will be mounted, mark two dots with 100 mm distance in-between vertically.
To Next Page
Loading...
