Factory Reset via Web GUI
The factory reset will immediately start after you click OK.
Factory Reset Confirmation
HANDLING METHOD FOR PHONE FAILURE STARTUP
State definition of the phone startup phase
Phone startup includes the following four stages.
1. The U-boot is started successfully, and MWI LED and MUTE LED are always red.
2. Linux system starts successfully, MUTE LED is off, and MWI LED is yellow constant.
3. The upper application is successfully started, MUTE LED and MWI LED are off, and the status of the follow-up lights is
controlled by the behavior of the phone itself.
4. Play startup music after a successful startup.
Introduction to the phone recovery process
1. The phone cannot be powered off during the upgrade process. If the upgrade fails due to power failure due to force
majeure or other reasons, the partition file of the phone will fail to read and write, and the phone cannot be started.
Therefore, a Recovery mechanism is provided to restore your phone to the maximum extent.
Warning
Once the process of resetting to factory settings has started, it cannot be cancelled and all the configuration will be lost. To
avoid losing your configuration, please back it up first.
To Next Page
Loading...
Need help?
General
