Table 9: GRP260x Keypad Buttons
Configuration via Keypad
To configure the LCD menu using the phone’s keypad, follow the instructions below:
Enter MENU options. When the phone is in idle, press the round MENU button or Menu Softkey to enter the
configuration menu.
Navigate in the menu options. Press the arrow keys UP/DOWN keys to navigate in the menu options.
Enter/Confirm selection. Press the round MENU to enter the selected option.
Exit. Press Return Softkey to exit to the previous menu.
Return to Home page.
The MENU options are listed in the following table.
Mute:
● During a call, Press Mute button to mute or unmute the call.
● When the phone is on idle, Press to Enable/Disable DND
Headset: Press to switch between headset and handset mode in an active call.
Message: Press to view voicemail messages.
Transfer: Press to transfer an active call to another number.
Speaker: Press to switch between speaker and handset mode in an active call.
Send/Redial
Volume: Adjust volume.
Navigation keys:
● In idle screen, press up key to display the IP.
● When entered the menu, Press the UP/DOWN keys to scroll through menu
options.
● Use RIGHT/LEFT keys to switch between Tabs or to toggle between enabling
and disabling some options. for example: switch between “All” and “Missed”
Calls Tabs in call history
MENU button:
● In idle screen, press to enter the main menu.
● Confirm the current selection or the inputted info.
Status Displays account status, network status, software version number and Hardware:
● Network status: Press to enter the sub menu for IP setting information (DHCP/Static IP/PPPoE), IPv4
address, IPv6 address, MAC address, Subnet Mask, Gateway, DNS and NTP servers.
To Next Page
Loading...
