Grandstream Networks GRP2615 Administration Guide

GRP2600 Administration Guide
Version 1.0.5.15
P a g e | 44
Add Auth Header on
Initial REGISTER
To define whether authorization Header will be added on initial REGISTER
from the first REGISTER. The default setting is “No”.
Allow SIP Reset
This is used to perform a factory reset through SIP NOTIFY. When the phone
receives the NOTIFY with Event: reset, the phone should perform a factory
reset after the authentication. The default setting is “No”.
Ignore Alert-Info
header
This option is used to configure default ringtone. If set to “Yes”, configured
default ringtone will be played. The default setting is “No”.
Account x → SIP Settings → Custom SIP Headers
Use Privacy Header
Controls whether the Privacy header will present in the SIP INVITE message
or not, whether the header contains the caller info.
• Default: The Privacy Header will show in INVITE only when “Huawei
IMS” special feature is on.
• Yes: The Privacy Header will always show in INVITE.
• No: The Privacy Header will not show in INVITE.
The default setting is “default”.
Use P-Preferred-
Identity Header
Controls whether the P-Preferred-Identity Header will present in the SIP
INVITE message.
• Default: The P-Preferred-Identity Header will show in INVITE unless
“Huawei IMS” special feature is on.
• Yes: The P-Preferred-Identity Header will always show in INVITE.
• No: The P-Preferred-Identity Header will not show in INVITE.
The default setting is “default”.
Use X-Grandstream-
PBX Header
Enables / disables the use of X-Grandstream-PBX header in SIP request.
When disabled, the SIP message sent from the phone will not include the
selected header. Default setting is “Yes”.
Use P-Access-
Network-Info Header
Enables / disables the use of P-Access-Network-Info header in SIP request.
When disabled, the SIP message sent from the phone will not include the
selected header. Default setting is “Yes”.
Use P-Emergency-Info
Header
Enables / disables the use of P-Emergency-Info header in SIP request.
When disabled, the SIP message sent from the phone will not include the
selected header. Default setting is “Yes”.

Grandstream Networks GRP2615 Specifications

General

Brand	Grandstream Networks
Model	GRP2615
Category	IP Phone
Language	English