GWN7000 to check periodically the configured firmware server for new
firmware depending on the set option, users have 4 options:
Disabled: If selected, the device will never check for new firmware.
Users can still upgrade the device manually using “Upgrade Now” button.
Check at Every X Hours: Users can choose a value in hours for the
device to check periodically for a new firmware.
Check at Hour of Day: Users can set a value from 0 to 23 (hours) for
the device to check at that time for a new firmware. For example, if set to
22, the device will check for a new firmware every day at 10 p.m.
Check at Day of Week: Users can choose a day from the dropdown list
and set a value from 0 to 23 (hours). The device will check at configured
time and day for a new firmware.
Click on button to begin the upgrade process immediately.
Note: The device will reboot after downloading the firmware.
To Next Page
Loading...
