Grandstream Networks GXP1450 - GUI Interface Examples

5 6
Note: For the detailed user manual, please download from:
http://www.grandstream.com/support
Tips For Using the Keypad:
PHONE CONFIGURATION:
Congure the GXP1450 using Web Browser:
1. To access the MENU, press the round MENU button.
2. Navigate the menu by using the UP/DOWN and LEFT/RIGHT buttons.
3. Press the round MENU button to conrm a menu selection.
4. The phone automatically exits MENU mode when there is an incoming call, the
phone goes off-hook, or when the MENU mode is left idle for 60 seconds.
1. Ensure your phone is powered up and connected to the Internet.
2. Press MENU button to go into menu of the phone.
3. Press the “down” arrow button to “Status” and press MENU button to check the
IP address.
4. Type the phone’s IP address in your PC browser (See gure on the right).
5. The default administrator password is “admin”; the default end-user password
is “123”.
Congure the GXP1450 using the Keypad:
1. Make sure the phone is idle.
2. Press the “MENU” button to access the menu options to congure the phone.
3. Select MENU->Cong, to congure settings for SIP Proxy, Outbound Proxy,
SIP User ID, SIP Auth ID, SIP Password.
4. Follow MENU options to congure the basic features of the phone. For ex-
ample, the IP address if using a static IP. For details, please check GXP1450
User Manual.
5. Please contact your ITSP (Internet Telephony Service Provider) for additional
settings that may be necessary to congure the phone.
Soft Keys
Message Waiting Indicator
Line Keys
Navigation Keys
Menu/OK Key
Hold
Transfer
Conference
Standard Keypad
Speaker
Send
Volume
Mute
Headset
Message
Phonebook