Copyright © cloudippbx.com
2
Disclaimer
* This document is subject to change without prior notice.
* A possibility of noise, broken voice, or disconnection may occur because of customers’ or our network
environment. We cannot guarantee the quality of voice.
* The company assumes no responsibility on the difference of call or voice quality when the hearing acuity
of individuals is concern.
* The company assumes no responsibility when it was used outside Japan.
* As for GXP1625 and GXP1620 and GXP1610 regular server maintenance, you may experience
temporarily service stops without prior notice.
* The company assumes no responsibility for the damages of customer caused by the phone malfunction or
breakdown.
Care
Please use soft dry clothes to clean the device.
Don’t use wet clothes.
Don’t use volatile chemicals like benzene, or thinner since they can damage the device.
If you want to use a chemical wipes, please read the cautionary notes before using it.
Connection Method:
1. Attach the phone stand or wall mount to the back of the phone where there are slots;
2. Connect the handset and main phone case with the phone cord;
3. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of
therouter) using the Ethernet cable;
4. Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into anelectrical
outlet.
5. The LCD will display provisioning or firmware upgrade information. Before continuing, please wait forthe
date/time display to show up;
6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the
IPaddress in web browser, you can further configure the phone.
7. GXP1625 supports PoE while GXp1620/GXP1610 do not.
To Next Page
Loading...
Need help?
General
