Dial Plan
The GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 supports alphanumeric characters in dial plan.
Two cases can be set to handle alphanumeric characters in the dial plan.
Capital X can be used to represent digits from 0-9, and letters a-z / A-Z.
For instance, if the following pattern is set on the dial plan {X123}, this mean that any string that start
with a letter/digit followed by 123 will pass the dial plan check (F123, a123, 5123,).
“\” character can be used to indicate a specific letter.
For instance, if users want to allow only one alphanumeric character, the dial plan should be like follow:
{\t\e\s\t}, when users dial “test” it will pass the dial plan check.
Screenshots
Users can take screenshots of the GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 phones, by
holding key HOLD and then pressing MENU key, the output will be shown on the phone webGUI under
“Status ? System Info” as shown in the figure below.
Image not found or type unknown
Figure 71: Screenshots
Users need to click on “Download” to view the screenshot
Call Features
GRANDSTREAM NETWORKS
No image found
Page 92
To Next Page
Loading...
