Grandstream Networks GXW410X - FXS and FXO Gateway Configuration Example

PaloSanto Solutions
Grandstream GXW4104/8 and Elastix Server Setup Guide
10
 Number of Rings Before Pickup: ch1-4:4;
 Caller ID Scheme: ch1-4:1; (Choose the option that better fits to your
PSTN line)
 Caller ID Transport Type: ch1-4:4;
Figure 4-13. FXO Lines
23.Click on the “Update” button and then POWER OFF the gateway and POWER ON
again. When it is on, go to “Status” section and check out the channel 1 is registered and
the PSTN line is connected and idle (the PSTN line must be connected in the first port).
See Figure 4-14