Need help?Do you have a question about the Grandstream Networks GXW4502 and is the answer not in the manual?
General| FXS Ports | 2 |
|---|---|
| FXO Ports | 2 |
| Voice Codecs | G.711, G.726, G.729 |
| Fax over IP | T.38 |
| Operating Temperature | 0 to 40°C |
| Humidity | 10% to 90% (non-condensing) |
| Protocols | SIP, RTP, RTCP |
| Network Interfaces | 2 x 10/100/1000 Mbps Ethernet ports |
Details the physical and network interfaces available on the GXW450X.
Outlines the voice processing features, codecs, and enhancements.
Covers signaling protocols, DTMF methods, and digital signaling options.
Provides instructions on how to access and log into the GXW450X web interface.
Provides an overview of the system's status, including trunks, channels, and disk capacities.
Configures settings for the GXW450X's embedded web server, including protocol and port.
Allows configuration of IPV4, IPV6, 802.1X, and static routes.
Manages custom firewall rules for traffic control and security.
Configures automatic blacklisting of hosts based on connection thresholds.
Provides intrusion detection and prevention for authentication errors.
Configures automatic time synchronization using NTP or DHCP.
Enables and configures basic SNMP features and trap proxy.
Covers configuration for E1/T1/J1 digital interfaces and signaling protocols.
Details the configuration of digital ports, span types, and signaling.
Guides on adding and configuring digital trunks and line selection.
Configures direct outward dialing for specific extensions or numbers.
Defines rules for routing outbound calls based on patterns and priority.
Sets up rules for handling incoming calls based on DID and Caller ID patterns.
Configures global SIP settings, including UDP port and failover options.
Enables and configures TCP and TLS connections for SIP.
Configures NAT settings for SIP and RTP traffic.
Configures RTP port ranges and strict RTP protection.
Configures digital hardware parameters and tone regions.
Describes methods for upgrading the GXW450X firmware remotely or locally.
Covers backing up and restoring the GXW450X configuration.
To Next Page
