Grandstream Networks HT801 Quick User Guide

CALL HOLD
 During an active call, press “Flash” button
on the analog phone (if the phone has that
button) to place the call on hold.
 Press “Flash” button again to release
previously held caller and resume
conversation.
Note: If no “ Flash” button is available, use
“hook flash” (toggle on-off hook quickly).
CALL WAITING
The call waiting tone (3 short beeps) indicates
an incoming call, if the call waiting feature is
enabled.
 To toggle between incoming call and
current call, you need to press the “Flash”
button. The first call is placed on hold.
 Press the “Flash” button to toggle between
the active calls.
CALL TRANSFER
Blind transfer
Assuming that phones A and B are in
conversation. The phone A wants to blind
transfer phone B to phone C:
 On the phone A, press “Flash” button to
hear the dial tone.
 The phone A dials *87 then dials caller C’s
number, and then # (or wait for 4
seconds).
 The phone A will hear the dial tone. Then,
phone A can hang up.
Note: “Enable Call Feature” must be set to
“Yes” in web configuration page.
Attended transfer
Assuming that phones A and B are in conversation.
The phone A wants to attend transfer phone B to
phone C:
1. On the phone A, press “Flash” button to hear the
dial tone.
2. Phone A dials the phone C’s number followed by
# (or wait for 4 seconds).
3. If phone C answers the call, phones A and C are
in conversation. Then A can hang up to complete
transfer.
4. If phone C does not answer the call, phone A
can press “flash” to resume call with phone B.
Note: When attended transfer fails and A hangs
up, the HT801 will ring back user A to remind A that
B is still on the call. A can pick up the phone to
resume conversation with B.
3-WAY CONFERENCING
The HT801 support Bellcore style 3-way
Conference. To perform the 3-way conference, we
assume that the call is established between phone
A and B. Phone A (HT801) wants to bring third
phone C into conference:
1. Phone A presses FLASH (on the analog phone,
or Hook Flash for old model phones) to get a
dial tone.
2. Phone A dials C’s number then # (or wait for 4
seconds).
3. If phone C answers the call, then A presses
FLASH to bring B, C in the conference.
4. If phone C does not answer the call, phone A
can press FLASH back to talk to phone B.
5. If phone A presses FLASH during conference,
the phone C will be dropped out.
6. If phone A hangs up, the conference will be
terminated for all three parties when
configuration “Transfer on Conference Hang
up” is set to “No”. If the configuration is set to
“Yes”, A will transfer B to C so that B and C
can continue the conversation.
CALL RETURN
In order to call back to the latest incoming
number.
1. Pick up the handset of the connected phone
(Off-hook).
2. After hearing the dial tone, input “*69”, and
follow by “#” or wait for time out.
3. Your phone will automatically call back to the
latest incoming number.
Note: Star codes (*XX) related features
mentioned above are supported by ATA default
settings. If your service provider provides different
feature codes, please contact them for
instructions.

Grandstream Networks HT801 Specifications

General

Brand	Grandstream Networks
Model	HT801
Category	Telephone Accessories
Language	English