Need help?Do you have a question about the Grandstream Networks HT801 and is the answer not in the manual?
General| Brand | Grandstream Networks |
|---|---|
| Model | HT801 |
| Category | Telephone Accessories |
| Language | English |
Lists major features of HT801 and HT802.
Details technical specifications for HT801/HT802.
Details the contents included in the HT801 and HT802 ATA packages.
Describes the different ports on the back panel of the HT801 and HT802.
Provides step-by-step instructions for connecting the HT801/HT802 device.
Explains the status indicated by the LED lights on the HT801 and HT802.
Instructions on how to find the device's IP address using the connected phone.
Details the menu structure and options available through the IVR.
Explains how to configure the device using a web browser interface.
Steps to access the device's web-based user interface.
Information on user and administrator login credentials and access levels.
How to apply and save configuration settings made through the web UI.
Steps to change the administrator password for enhanced security.
Steps to change the end-user password for basic settings access.
How to modify the default HTTP port used for web access.
Configuration options for Network Address Translation, particularly STUN server setup.
Supported Dual-Tone Multi-Frequency signaling methods.
Selection and ordering of preferred voice codecs for audio transmission.
Guide to configuring the device using the IVR voice prompt menu.
Instructions for registering SIP accounts on the HT801 and HT802.
How to remotely restart the ATA device via its web interface.
Instructions on how to make outgoing calls using the connected analog phone.
How to establish direct IP-to-IP calls without a SIP proxy.
Method to place an active call on hold using the flash button.
How to manage incoming calls when call waiting is enabled.
Procedures for blind and attended call transfers.
Steps to set up and manage a three-way conference call.
How to call back the last received incoming number.
Instructions for resetting the device to factory defaults using the physical reset button.
Steps to perform a factory reset using the Interactive Voice Response menu.
Guide on how to encode the device's MAC address for IVR commands.
To Next Page
