Accessing the Web UI
Via NET1 port
1. You may check your HT841/HT881 IP address using the IVR on the connected phone.
Please see Obtain the HT841/HT881 IP address via the connected analogue phone
2. Open the web browser on your computer.
3. Enter the HT841/HT881’s IP address in the address bar of the browser.
4. Enter the administrator’s password to access the Web Configuration Menu.
Via NET2 port
1. Power your HT841/HT881 using PSU with the right specifications.
2. Connect your computer or switch directly to your HT841/HT881 LAN port.
3. Open the web browser on your computer.
4. Enter the default LAN IP address (192.168.2.1) in the address bar of the browser.
5. Enter the administrator’s password to access the Web Configuration Menu.
6. Make sure to reboot your device after changing your settings to apply the new configuration.
Web Configuration Pages Definitions
This section describes the options in the HT841/HT881 Web UI.
Status Page Definitions
System Info
The computer must be connected to the same sub-network as the HT841/HT881. This can be easily done by connecting the computer to the same hub
or switch as the HT841/HT881.
Please make sure that your computer has a valid IP address on the range 192.168.2.x so you can access the web GUI of your HT841/HT881.
Product Model Displays the Product model: HT841 or HT881
Serial Number Displays the device's serial number
Hardware Version Displays the hardware version
Part Number Displays the part number
Software Version
● Program: Displays the current software version running on the device
● Bootloader: Displays the bootloader version
● Core: Displays the Core version
● Base: Displays the Base version
● CPE: Displays the Customer Premises Equipment version
Software Status Displays whether the software is running correctly on the device
To Next Page
Loading...
