Page 5For technical questions, please call 1-888-866-5797.Item 58653
SAFETYOPERATIONMAINTENANCE SETUP
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Release Trigger and unplug the power cord from its electrical outlet
before changing attachments or filling tank.
Filling Tank
WARNING! TO PREVENT SERIOUS INJURY:
To prevent steam burns when filling tank:
1. Release Trigger and unplug unit,
then let unit cool for 5-6 minutes.
2. After unit has cooled, tank pressure
should reduce to a safe level and Tank
Cap can be opened. The Cap will spin
freely until pressure level is safe.
3. Slowly unscrew Tank Cap to allow
residual steam to seep out the top.
4. Empty remaining water from Tank. Water
may still be hot while coming out of
the Tank. Do not touch the metal center
of the Cap or metal tank inlet.
5. Fill the Measuring Cup with distilled water
no higher than the 250mL mark.
250 mL
NOTICE: To prevent damage to Steam Cleaner,
use distilled water, do not add chemicals
to water, and do not overfill tank.
6. Place Funnel in Fill Port, then pour
distilled water in Funnel.
7. Replace Tank Cap by turning clockwise
until tightened securely.
To Next Page
Loading...