Page 7For technical questions, please call 1-888-866-5797.Item 58653
SAFETYOPERATIONMAINTENANCE SETUP
Connecting Attachments
Spray Cup with Round Brush/Bent Spray Nozzle - Clothing
NOTICE: Consult floor/carpet manufacturer′s instructions before steam cleaning.
Do not use on painted surfaces. Do not use on unsealed, polished or waxed surfaces.
Note: Spray Cup with Round Brush and Bent
Spray Nozzle both attach in the same manner.
This section will apply to both attachments.
1. Hold the stem of the Spray Cup up to
the Short Spray Nozzle, making sure the
hex patterns on both pieces match.
2. To connect, push Spray Cup onto
the Short Spray Nozzle.
3. The Spray Cup can point in six different directions,
and these can be selected during installation.
4. To remove Spray Cup, pull cup
off of Short Spray Nozzle.
Window/Door Attachment - Windows, Shower Doors, Mirrors, Oven Doors and Tile
CAUTION! IN COLD WEATHER, GLASS MAY BREAK DUE TO THERMAL SHOCK!
To prevent injuries from broken glass, DO NOT place attachment directly on glass.
Warm the glass from a distance of 1 foot, then release Trigger and squeegee water away.
1. Connect General Spray Nozzle
to Short Spray Nozzle.
2. Install the two hooks of the Window Spray
Nozzle Attachment onto the suspension
lugs of the General Spray Nozzle.
3. Hold the large hook of the Window Spray Nozzle
Attachment, then push attachment up and secure
it to the body of the General Spray Nozzle.
Countertops, Stoves, Ovens, Sinks, Toilets, Grout and Tight Spaces
Note: The Nozzle Extension connects
in the same manner as the Long Spray
Nozzle & General Spray Nozzle.
1. Hold Nozzle Extension and align the
single-line mark on Nozzle Extension with the
double-line mark on Short Spray Nozzle.
2. Push Nozzle Extension onto the Short Spray Nozzle.
3. Rotate Nozzle in clockwise direction and align
the double-line mark on Nozzle Extension with
the double-line mark on Short Spray Nozzle.
4. To remove Nozzle Extension, rotate
counterclockwise until the single-line mark on
Nozzle Extension is aligned with the double-line
mark on Short Spray Nozzle, then pull off.
To Next Page
Loading...