XUB Series 29666 V4
Operating Manual
Installation
The following parts and accessories are included with the Grant digital ultrasonic bath:
- 1 x basket
- 1 x lid
- 1 x MC card and MC USB card reader
- 1 x 2m length of drain hose
- 1 x hose tail
- 1 x Grant M2 detergent sample
- 3 x power cables (UK, EU, AUS)
How to install
Screw the hose connector into the drain valve located on the rear of the unit.
Locate the unit close to a drain or sink.
Connect one end of the drain hose to the hose connector, and locate the other end
over a drain or sink.
Connect the mains lead into a suitable mains socket.
Ensure that the mains plug and the switch are easily accessible.
Your Grant digital ultrasonic bath is now ready to use.
To Next Page
Loading...