GRAPHTEC GL820 - Page 15

4. Data Replay : How to Replay Captured Data
When data capture ends, data is automatically replayed. The automatically replayed data
is the data captured to the internal memory which has been set as the data capture destination.
Press the QUIT key to end the data replay Tenn
saae my -(1) Press the REVIEW ee
(2) Since the file you want to replay has the file name that was appended automatically
when the data was captured, move the cursor to the OK button and then press
the ENTER ke
ameove
(3) The Replay screen opens.
(1) Scroll bar Displays the position within the whole data and the display width.
smn (2) Level display area”: Displays the levels of A and B cursors and the difference
anes between the A and B values,
(3) Quick settings : Use the <p keys to search the previous or next level
(Note: Make search settings in the menu.)
(4) Time display Displays the sampling interval and the time of the cursor.
(5) Cursor Displays the cursor. (Note: Press the CURSOR key to switch
between A and B cursors.)
Move the cursor using the <p keys or the <p» keys.
Desired level values and time can be checked by moving the cursor.
Press the QUIT key to end the data replay operation.
— A confirmation message is displayed. Press the ENTER key.
Data replay ends, and the GL820 goes into the Free Running status.
Explanation of basic operation in the GL820 is completed.
The GL820 has many other convenient functions. Please refer the next five pages for details.
14