GRAPHTEC GL840 - How to Connect Via Wireless LAN

E-6
HowtoConnectviaWirelessLAN
■WirelessLANsettings
Specifythewirelessconnectionsettingson[LAN]onthemenuofGL240,orspecifyon[WLAN]
onGL840.
SpecifythewirelessLANsettingsbythefollowingprocedure.
Set[WirelessLAN]from[Off]to[Accesspoint].
ForGL240
ForGL840
Aftersettingto[Accesspoint],restartthewirelessLAN.
AfterrestartingthewirelessLAN,followtheinstructionifturningthepoweronagainis
necessary.
SpecifythenecessarysettingitemssuchasSSID.
SpecifytheAP-IPsetting,andreflectthesetting.
SpecifytheIP
address.
Perform[Apply
settings].
Next,specifytheprintersettings.