Press the [START/STOP] key to perform start and stop of a data capture while the
GL840 is in the Free Running status.
If this key is held down while the power to the GL840 is turned on, the GL840 is
switched the SD memory card to the Drive Mode.
* For more information about the Drive Mode of the SD memory card, refer to the User's Manual in
the supplied CD.
9. START/STOP (USB DRIVE MODE)
Press the [REVIEW] key to replay captured data. If the GL840 is in the Free
Running status, data files that have already been captured are replayed. If the
GL840 is still capturing data, the data is replayed in a 2-screen format.
* A data replay operation will not be performed if data has not been captured.
10. REVIEW
Press the [DISPLAY] key
11. DISPLAY
Press the [CURSOR] key to switch between the A and B cursors during a data
replay operation.
If the Alarm setting has been specified as "Alarm Hold", press this key to clear the
alarm.
The alarm settings are made in the "TRIG" menu.
12. CURSOR (ALARM CLEAR)
Press the [FILE] key to operate saving the replaying data to the SD memory card,
copying the screen, and saving/reading the settings as well as replacing the SD
memory card during data capture.
13. FILE
When this key is pressed during free-running, you can perform the setting easily on
the menus of the easy capture setting, easy trigger setting, and wireless LAN
connection setting (available only when the wireless unit is inserted.).
14. NAVI
Points to Remember
•
Waveform + Digital
This is the default screen when the GL840 is turned on,
and both waveforms and digital values are displayed.The
screen settings can also be changed by using the
[SPAN/TRACE/POSITION] key.
•
Full-screen Waveform
Displays waveform only in the full-screen.
* For more information, refer to the User's Manual in the
supplied CD.
•
Digital + Calc
Displays large-size digital values and two types of
calculation processing results. The calculation settings are
made in the "DATA" menu.
Use the key or key to switch digital display
modes.
Waveform + Digital
Full-screen Waveform
Digital + Calc
9
To Next Page
Loading...
