Contents
Thank you for choose the midi LOGGER GL840.
This Quick Start Guide describes the basic operations.
Please refer to the manual (PDF) in the CD-ROM for more information.
Nomenclature ……………………………………………………… 2
Connection Procedures ……………………………………………3
Precautions to Observe When Performing Measurement
………5
Descriptions of the Control Panel Keys ………………………… 7
Descriptions of the Menu Screens …………………………… 10
Measurement Procedure…………………………………………11
1. Preparations :
How to Make the Preparations Required for Data Capture
…………………
11
2. Setup : How to Make the Settings ……………………………………………12
3.
Data Capture : How to Capture Data
…………………………………………15
4.
Data Replay : How to Replay Captured Data
………………………………16
Convenient Functions …………………………………………… 17
Trigger Functions to Control Data Capture Start/Stop Operations
………… 17
Span, Position and Trace Functions to Adjust the Waveform Display
……… 19
Specifications
………………………………………………………20
Standard Specifications
…………………………………………………………20
External Input/Output Functions
…………………………………………………20
Common specification of the terminal in the input section
………………… 21
Specification of input section
(GL840-M with standard terminal)
…………………… 21
Specification of input section
(GL840-WV Withstand High Voltage high-precision terminal)
… 22
Installation Guide
…………………………………………………22
After unpacking, check the GL840's Exterior to make sure that
there are crack or other damage before use.
• Quick Start Guide : 1 • SD memory card: 1 • Ferrite core: 1
• CD-ROM : 1 • AC cable/AC adapter : 1
Checking the Outer Casing
Checking the Accessories
1
To Next Page
Loading...
