GrassFlap 412T - Page 11

GrassFlap.com Phone: (502)594-3546 11
RE Pedal Location & Cable Routing
WARNING:
First ½” after
be straight
WARNING:
First ½” after
be straight
A
B
C
D
FLAP CONNECTION
3/16”
Clevis Pin
10-99-22
Bushing Cable
Pin Flap End
10-99-28
PEDAL CONNECTION
A
B
C
1/4” Clevis Kit
10-99-21
1/4” Pin
Preferred locations for RE pedal assembly.
Option 1
Option 2
WARNING:
First ½” after
tting must
be straight
Pedal Connection:
A) Place clevis on cable ball
and squarely seat in
bottom of clevis.
B) Insert 1/4” diameter pin.
C) Insert cotter pin and wrap
around pin.
Flap Connection:
A) Place 1/4” bushing in ap.
B) Slip clevis onto ap.
C) Insert 3/16” pin with head
on spring side.
D) Insert cotter pin and wrap
around pin.
2x
Install Pedal
A) Mark and drill two11/32” holes, if needed, for pedal
mounting bolts.
B) Tighten two 5/16” x 1” hex bolts to secure pedal
assembly to mower deck.
Cotter Pin
Cotter Pin