GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors! 12/2011
Made in
Vietnam
22
• Protect the model and RC equipment against damage or slippage during
transport.
Care and maintenance
• Clean the model carefully after each use. Also remove any dirt from the
propeller. Clean the model and the RC components using suitable cleaning
agents only. Ask your model shop for information.
• If the model is not to be operated for a considerable time, all the moving parts
must be cleaned and re-lubricated.
Tips on building the model
• Before assembling the model, it is essential to study the construction diagram
and the instructions all the way through. When using tools, be aware of the
possible dangers.
• Use only suitable cables that are adequate for the electrical currents that occur
during operation.
• Clean residual grease from all connections that are to be glued. This can, for
example, be done through sanding and using a non-relubricating cleaning
solution. The same goes for the surfaces to be painted, in order to make sure
that the paint sticks. Before gluing parts, always roughen the corresponding
surfaces (especially for GFR fuselages) carefully with fine sandpaper and de-
grease them thoroughly, for example with acetone. Otherwise, adequate
adhesion is not assured.
To Previous Page
Loading...
