To Next PageTo Next Page
Need help?Do you have a question about the Gravely 915148 ZT 42 and is the answer not in the manual?
General| Engine Displacement | 726 cc |
|---|---|
| Cutting Width | 42 inches |
| Transmission | Hydro-Gear EZT |
| Deck Material | Steel |
| Deck Type | Fabricated |
| Speed | 7 mph |
| Warranty | 3 years |
Information on obtaining manuals in languages other than English.
Guidance on how to read and understand the manual's contents.
Reference to a separate manual for engine-specific information.
Importance of knowing unit and engine model/serial numbers.
Steps for registering the product with the manufacturer.
Warning against using non-genuine replacement parts.
Customer responsibility for assembly and understanding instructions.
Manufacturer's right to change product designs and specifications.
Broad warnings about machine capabilities and potential hazards.
Explanation of safety symbols used in the manual and on decals.
Definitions for notation types: Danger, Warning, Caution, Note, Important.
Hazards related to objects being discharged or thrown by the mower.
Hazards concerning body parts near rotating or moving components.
Risks associated with operating on slopes and potential tipping.
Hazards related to servicing the unit and general danger alerts.
Hazards involving bystanders, loss of traction, and general alerts.
Safety rules regarding hot parts, smoking, and emission controls.
Rules for operation, operator age, and suitability for use.
List of tools needed and steps for unpacking the unit.
Instructions for connecting the battery and positioning the unit.
Procedure for checking the engine oil level before operation.
Checks for correct tire pressure and mower deck leveling.
Instructions and warnings for filling the fuel tank.
Verifying the safety interlock system and control functions.
Identification of ignition switch, PTO, and parking brake.
Identification of steering levers, lift pedal, and throttle.
Identification of seat adjustment, deck height selector, and washout port.
Tests to ensure proper function of the safety interlock system.
How to use the ignition switch and throttle/choke lever.
How to engage/disengage the parking brake and PTO switch.
Instructions for operating the steering levers for movement.
Procedures for adjusting the seat and mower deck height.
Information on using the towing hitch and the deck washout port.
How to check fuel level and proper fueling techniques.
Guidelines on acceptable gasoline types and potential damage from overfilling.
Procedures for fuel stabilization and stopping in emergencies.
Tips for optimal mowing performance and best practices.
Instructions for safely transporting the unit on a vehicle.
Routine checks to be performed before each use.
Scheduled maintenance tasks based on operating hours.
Procedures for engine maintenance and unit lubrication.
Checks for battery, fasteners, and drive belts.
Steps to tip the seat forward for access.
Instructions for removing and installing the mower deck.
Measuring the distance from mower blades to the ground.
Adjusting the forward pitch of the mower blades.
Adjusting the side-to-side pitch of the mower blades.
Procedure for adjusting deck height and blade pitch.
Instructions for replacing and sharpening mower blades.
General information on battery maintenance and warnings.
Steps for removing and installing the battery.
Procedure for installing the factory-supplied battery.
Procedure for installing an optional U1 battery.
Steps for cleaning battery terminals and cables.
Procedures for charging the battery and warnings against jump-starting.
Instructions for checking the carbon canister filter.
Procedure to adjust the height of the steering levers.
Procedure to adjust the width of the steering levers.
Procedure to adjust the forward/backward position of steering levers.
Procedure to adjust forward speed tracking.
Instructions for short-term and long-term storage of the unit.
Steps to prepare the fuel system for storage.
How to add fuel stabilizer to the fuel tank for storage.
Diagnosing and correcting engine starting and running problems.
Troubleshooting unit movement and PTO engagement problems.
Diagnosing and correcting engine overheating issues.
Troubleshooting issues with unit movement and straight-line travel.
Diagnosing and correcting problems causing poor cutting quality.
Information on genuine service parts and optional accessories.
Details on warranty periods, coverage, and special extensions.
Specific exclusions and limitations to the warranty coverage.
Customer obligations for maintaining warranty coverage.
Information on how to locate authorized service providers.
Further warranty exclusions and legal disclaimers.
