To Next PageTo Next Page
Need help?Do you have a question about the Gravely 915150 ZT 50 and is the answer not in the manual?
General| Engine Power | 23 hp |
|---|---|
| Engine Displacement | 725 cc |
| Cutting Width | 50 in |
| Transmission | Hydrostatic |
| Deck Material | Steel |
| Engine | Kohler 7000 Series |
| Weight | 650 lbs |
| Turning Radius | Zero turn |
| Wheel Size Rear | 20 x 10 inches |
| Wheel Size Front | 13 x 6.5 inches |
Explains the importance of safety decals and their locations.
Explains the meaning of safety alert symbols used in the manual.
Details dismemberment hazards and avoidance.
Explains discharge hazards and precautions.
Covers tipping hazards and safe slope operation.
Outlines safety precautions before servicing.
Discusses bystander hazards and safety.
Details loss of traction hazards and handling.
Lists necessary assembly tools.
Instructions for unpacking unit and components.
Steps for connecting the battery.
Guide to position unit for operation.
Instructions to check engine oil.
Instructions for checking tire pressure.
Steps to level mower deck.
Guidance on filling fuel tank correctly.
Procedures to verify safety interlock system.
Steps to check control functionality.
Tests to ensure the safety interlock system is operational.
Explanation of the ignition switch functions and positions.
Details on the throttle and choke lever operation.
How to engage/disengage parking brake.
Operation of PTO switch for blades.
Instructions for operating steering levers.
How to adjust seat for comfort.
Adjusting mower deck height for cutting.
Info on trailer hitch and towing capacity.
Instructions for using washout port to clean deck.
Detailed instructions for filling fuel tank.
Recommended gasoline types and octane.
Guidance on using fuel stabilizer for storage.
Steps for emergency operation.
Procedures for starting/stopping engine.
Safety and procedures for unit transport.
Tips for optimal mowing performance.
Regular checks of the safety interlock system.
Procedure to check the parking brake.
Instructions for cleaning the unit.
Steps for checking tire condition and pressure.
Inspecting blades for wear or damage.
Adhering to engine manual for maintenance.
Maintaining battery and terminals.
Lubrication points for unit components.
Ensuring fasteners are tightened.
Inspecting and replacing worn belts.
Procedure to tip seat forward for access.
Steps for deck removal/installation.
How to level deck and adjust blade pitch.
Guide to adjusting deck height and pitch.
Instructions for blade replacement.
Proper techniques for blade sharpening.
General information on battery maintenance.
Procedures for battery removal/installation.
Steps to install a U1 battery.
How to clean battery components.
Procedures for charging battery.
Information regarding jump-starting the unit.
Maintenance of carbon canister filter.
How to adjust steering lever height.
Steps to adjust steering lever width.
Adjusting lever position forward/backward.
Procedure to adjust forward speed tracking.
Guidelines for short-term storage.
Instructions for long-term storage.
Managing fuel system for storage.
Steps for adding fuel stabilizer before storage.
Causes and solutions for start issues.
Troubleshooting tips for rough running.
Diagnosing unit movement issues.
Resolving PTO/blade engagement problems.
Fixing engine overheating issues.
Solutions for unit movement with brake.
Addressing tracking issues.
Fixing unit creep.
Troubleshooting poor grass cutting.
Details on extended warranty coverage.
Conditions not covered by warranty.
Customer duties for warranty.
Locating service providers.
Specific warranty exclusions.
General disclaimer on product design changes.
Liability limits for damages.
Warranty provisions for Australia.
Implied warranty limitations.
