Gravely MINI-ZT 915054 User Manual (English)

Questions and Answers:

F
Felicia MendozaJul 30, 2025
Why won't my Gravely MINI-ZT 915054 engine crank or start?
- M
  Ms. Sandra GonzalezJul 30, 2025
  If your Gravely Lawn Mower engine won't crank or start, here's what might be happening: * The safety interlock system may not be engaged or could be faulty. Check the safety interlock system. * The fuel tank could be empty. Refill the fuel tank. * The battery might be discharged. Charge the battery. * There could be a poor connection between the battery and its cables. Tighten the battery cables and clean them. * The spark plug wires might be loose, or the spark plugs could be faulty. Connect the spark plug wires or replace the spark plugs. * There may be a faulty electrical system or engine. In these cases, it is best to contact your Gravely Dealer.
D
Donna AguilarAug 3, 2025
Why doesn't my Gravely MINI-ZT 915054 move when steering levers are used?
- L
  Leah HansenAug 3, 2025
  If your Gravely Lawn Mower doesn't move when using the steering levers while the engine is running, consider these possibilities: * The transmission bypass lever might be engaged. Disengage the transmission bypass lever. * The hydrostatic belt could be faulty. Replace the hydrostatic belt. * If neither of those solutions work, there may be a faulty transmission, and you should contact your Gravely Dealer.
K
karla48Aug 8, 2025
What to do if PTO or mower blades do not engage on Gravely MINI-ZT 915054 Lawn Mower?
- J
  joannajohnsonAug 8, 2025
  If the PTO or mower blades on your Gravely Lawn Mower won't engage or shut off, it could be due to several reasons: 1. The operator presence switch might not be depressed. Make sure you are sitting on the seat to depress the switch. 2. The electric clutch connector could be loose or disconnected. Connect the electric clutch connector. 3. The PTO belt may be faulty. Replace the PTO belt. 4. For issues related to a faulty operator presence switch, PTO switch, wires, connectors, or clutch, it is best to contact your Gravely Dealer.
T
Timothy MurphyAug 12, 2025
How to fix a Gravely MINI-ZT 915054 Lawn Mower engine that runs rough?
- V
  Victor RodriguezAug 12, 2025
  If your Gravely Lawn Mower engine runs rough, here are a few potential causes: * The choke may be engaged. Disengage the choke. * The air filter cartridge could be plugged. Clean or replace the air filter cartridge. * If the issue persists, there may be a faulty engine, and you should contact your Gravely Dealer.
P
Paul SandersAug 16, 2025
Why is the cutting quality poor on my Gravely MINI-ZT 915054?
- A
  Aaron ChangAug 17, 2025
  If you're experiencing poor cutting quality with your Gravely Lawn Mower, consider these potential issues: * The mower deck might not be level, or the mower pitch could be incorrect. Level and adjust the pitch of the mower deck. * The mower blades may be dull or faulty. Sharpen or replace the mower blades.
T
Timothy RodgersAug 20, 2025
What to do if my Gravely MINI-ZT 915054 engine overheats?
- J
  Jessica BauerAug 21, 2025
  If your Gravely Lawn Mower engine is overheating, here are possible causes: * The engine oil level might be low. Add engine oil. * The cooling system could be plugged. Clean the cooling system. * If the issue persists, there may be a faulty engine, and you should contact your Gravely Dealer.
J
Joshua ReeseAug 26, 2025
How to fix a Gravely MINI-ZT 915054 that does not travel straight?
- Q
  qsimmonsAug 26, 2025
  If your Gravely Lawn Mower isn't traveling in a straight line, check these items: * Incorrect tire pressure could be the issue. Check the tire pressure. * The steering levers may need adjustment. Adjust the steering levers. * If the problem continues, the hydrostatic transmission and/or linkage might need adjustment; in this case, contact your Gravely Dealer.