EasyManua.ls Logo

Gravely ZT 50 - User Manual

Gravely ZT 50
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ZT
04966000D 8/18
Printed in USA
ENGLISH
FRANÇAIS
E10
Operator’s Manual
Manuel du Utilisateur
915232 – ZT 42 CARB
(SN 000101 +)
915234 – ZT 50 CARB
(SN 000101 +)
915232 – ZT 42 CARB
(SN 000101 +)
915234 – ZT 50 CARB
(SN 000101 +)
915244 – ZT 34
(SN 000101 +)
915246 – ZT 42
(SN 000101 +)
Models
915210 – ZT 34
(SN 000101 +)
915212 – ZT 42
(SN 000101 +)
915214 – ZT 50
(SN 000101 +)
915208 – ZT 34 CARB
(SN 000101 +)

Other manuals for Gravely ZT 50

Questions and Answers

  • J
    Jeremy BrownAug 4, 2025
    Why won't my Gravely Lawn Mower engine crank or start?
    • M
      michaelfoleyAug 4, 2025
      There are several potential reasons why your Gravely Lawn Mower engine won't crank or start: * The safety interlock system may not be engaged or could be faulty. Check the safety interlock system. * The fuel tank might be empty. If so, fill the fuel tank. * The battery could be discharged. In this case, charge the battery. * There might be a poor connection between the battery and battery cables. Tighten or clean the battery cables and battery. * Spark plug wires could be loose, or spark plugs might be faulty. Connect the spark plug wires or replace the spark plugs.
  • R
    Robert SimsAug 8, 2025
    Why does my Gravely ZT 50 not travel in a straight line?
    • A
      Angelica CamachoAug 8, 2025
      If your Gravely Lawn Mower isn't traveling in a straight line, it could be caused by: * Incorrect tire pressure. Check the tire pressure. * Steering levers needing adjustment. Adjust the steering levers.
  • E
    edwin69Aug 12, 2025
    What to do if my Gravely ZT 50 Lawn Mower does not move with engine running when using steering levers?
    • Y
      ymartinezAug 13, 2025
      If your Gravely Lawn Mower does not move when using the steering levers, it might be because: * The transmission bypass lever is engaged. Disengage the transmission bypass lever. * The hydrostatic belt is faulty. Replace the hydrostatic belt.
  • M
    Marco MontoyaAug 16, 2025
    What to do if my Gravely ZT 50 Lawn Mower engine runs rough?
    • M
      Michael AndersonAug 17, 2025
      If your Gravely Lawn Mower engine is running rough, it could be due to a few reasons: * The choke might be engaged. Disengage the choke. * The air filter cartridge could be plugged. Clean or replace the air filter cartridge.
  • Z
    zgomezAug 21, 2025
    What to do if PTO or mower blades do not engage or shut off on my Gravely ZT 50 Lawn Mower?
    • J
      Jessica KellyAug 21, 2025
      If the PTO or mower blades on your Gravely Lawn Mower do not engage or shut off, consider these possibilities: * The operator presence switch may not be depressed. Ensure you are sitting on the seat to depress the operator presence switch. * The PTO belt might be faulty. Replace the PTO belt.
  • S
    Scott LeeAug 25, 2025
    Why does my Gravely Lawn Mower engine overheat?
    • N
      Natalie RobertsonAug 26, 2025
      Your Gravely Lawn Mower engine may overheat due to: * Low engine oil level. Add engine oil. * A plugged cooling system. Clean the cooling system.
  • P
    Paula KentAug 29, 2025
    Why is the cutting quality poor with my Gravely ZT 50 Lawn Mower?
    • D
      David CarrAug 29, 2025
      If you're experiencing poor cutting quality with your Gravely Lawn Mower, consider the following: * The mower deck may not be level, or the mower pitch is incorrect. Level and adjust the pitch of the mower deck. * The mower blades could be dull or faulty. Sharpen or replace the mower blades.

Summary

Getting Started

Model and Serial Number Identification

Locate and record your unit's model and serial numbers for service.

Manuals in Other Languages

Information on obtaining manuals in languages other than English.

Safety Information

General Safety Precautions and Warnings

Essential guidelines to prevent injury and ensure safe operation.

Required Operator Training and Alerts

Requirements for operator training and understanding safety alerts.

Safety Decals and Locations

Explains the meaning and location of safety decals on the equipment.

Specific Hazard Identification

Details dangers such as discharge, amputation, tipping, and bystander hazards.

Controls and Operation

Controls and Features Overview

Identification and description of all major controls and features.

Safe Operating Procedures

Instructions for starting, stopping, and safely operating the mower.

Steering and Seat Adjustments

How to adjust steering levers and seat for operator comfort and control.

Mower Deck Height Adjustment

Procedure for setting the cutting height for the mower deck.

Assembly and Setup

Unit Unpacking and Initial Assembly

Steps for unpacking and initial assembly of the mower.

Battery Installation and Connection

Guidance on installing and connecting the unit's battery.

Maintenance and Service

Scheduled Maintenance Schedule

Recommended checks and tasks for regular unit upkeep.

Mower Deck and Blade Servicing

Procedures for deck maintenance, removal, installation, and blade servicing.

Battery Servicing and Charging

Steps for battery removal, installation, charging, and cleaning.

Troubleshooting

Engine and Starting Problems

Diagnosing and resolving issues with engine starting and running.

Operational and Performance Issues

Addressing problems with unit movement, controls, and cutting quality.

Specifications

Limited Warranty Information

Warranty Coverage and Terms

Details of warranty periods and what is covered based on product type.

Warranty Exclusions and Limitations

Lists items and conditions explicitly excluded from warranty coverage.

Gravely ZT 50 Specifications

General IconGeneral
Engine BrandKawasaki
Engine ModelFR691V
Engine Displacement726cc
Horsepower23 hp
Deck MaterialSteel
Number of Blades3
Cutting Width50 in
Cutting Height1.5 - 5 in
Deck Thickness10 ga
Speed8 mph
Turning RadiusZero-turn

Related product manuals