EasyManua.ls Logo

Gravely 927060-1028 - User Manual

Gravely 927060-1028
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner/Operator Manual
Models
927060 - 1028
927062 - 1232
927064 - 1440
Rear-Engine Rider
02777600E 5/03
Supersedes 02777600, A–D
Printed in USA
ENGLISH
FRANÇAIS
ESPAÑOL
Transfer
model &
serial number
label from
product reg-
istration here.
Coller lautocollant du
modèle et du numéro de
série dans cet encadré.
Transferir aquí la etiqueta del
modelo y número de serie
del registro del producto.

Questions and Answers

  • J
    Jeremiah JonesJul 29, 2025
    Why my Gravely 927060-1028 engine will not crank or start?
    • O
      orojasJul 29, 2025
      There are several reasons why your Gravely Lawn Mower engine might not crank or start: * The safety interlock system may not be engaged or could be faulty. Check the safety interlock system. * The fuel tank might be empty, so fill it up. * The battery might be discharged. Charge the battery. * There could be a poor connection between the battery and cables. Tighten or clean the battery cables. * The spark plug wire might be loose or the spark plug faulty. Connect the spark plug wire or replace the spark plug. * There may be a faulty electrical system or engine. In these cases, contact your Gravely Dealer.
  • R
    Randy FitzgeraldAug 3, 2025
    Why does my Gravely 927060-1028 not move with engine running?
    • J
      John MonroeAug 3, 2025
      If your Gravely Lawn Mower is not moving with the engine running when using the forward and reverse pedal, it might be because: * The transmission bypass lever is engaged. Disengage the transmission bypass lever. * The hydrostatic belt is faulty. Replace the hydrostatic belt. * There is a faulty transmission. In this case, contact your Gravely Dealer.
  • S
    Susan KellyAug 8, 2025
    How to improve cutting quality of Gravely 927060-1028?
    • C
      Cynthia KerrAug 8, 2025
      If you notice poor cutting quality with your Gravely Lawn Mower, it could be due to: * The mower deck not being level or the mower deck pitch being incorrect. Level the mower deck or adjust the pitch. * Dull or faulty mower blades. Sharpen or replace the mower blades.
  • C
    Christopher GibsonAug 13, 2025
    Why does my Gravely 927060-1028 engine run rough?
    • M
      Matthew LaraAug 13, 2025
      If your Gravely Lawn Mower engine runs rough, it could be due to: * The choke being engaged. Disengage the choke. * A plugged air filter. Clean or replace the air filter. * A faulty engine. If this is the case, contact your Gravely Dealer.
  • A
    Alexander SteeleAug 18, 2025
    What to do if PTO or mower blade(s) does not engage or shuts off on Gravely 927060-1028?
    • B
      Brian HigginsAug 18, 2025
      If the PTO or mower blades on your Gravely Lawn Mower do not engage or shut off, consider the following: * Ensure the operator presence switch is depressed by sitting on the seat. * Check if the electric clutch connector is loose and connect it if necessary. * Inspect for a faulty PTO belt or mower belt on 40-inch decks and replace if needed. * For other issues such as a faulty operator presence switch, PTO switch, wires, connectors, or clutch, contact your Gravely Dealer.
  • L
    lgreenAug 23, 2025
    How to fix Gravely 927060-1028 engine overheating?
    • B
      Brandon JohnsonAug 23, 2025
      If your Gravely Lawn Mower engine overheats, consider the following: * The engine oil level may be low. Add engine oil. * The cooling system may be plugged. Clean the cooling system. * There may be a faulty engine. In this case, contact your Gravely Dealer.

Summary

Rear-Engine Rider Owner;Operator Manual

Manual Introduction and Setup

Engine Exhaust Health Hazard

Chemical warning regarding engine exhaust.

Delivery and Initial Safety

Assembly Hazard Warning

Hazard warning for improper assembly or adjustments.

Core Safety Information

Cutting Machine Hazards

Hazard warning about the cutting machine's capabilities.

Understanding Safety Alert Symbols

Explanation of safety alert symbols and their meaning.

Critical Operating Dangers

General Operation Safety Rules

Key safety instructions for general operation.

Safe Slope Operation Techniques

Safe techniques for operating on slopes.

Hot Surface Warning

Warning about hot surfaces on the unit.

Rotating Parts Hazard Warning

Safety instruction regarding rotating components.

General Safety Rules and Cautions

Operator Responsibilities and Precautions

Operator's duties and adherence to safety practices.

Pre-Use Inspection and Area Safety

Checklist for inspecting the unit and keeping work area clear.

Operator Impairment Prohibition

Prohibition of operating under influence.

Comprehensive Safety Guidelines

Moving Parts and Pinch Point Safety

Safety regarding moving parts and pinch points.

Maintenance and Operation Safety Steps

Safety steps before leaving operator's position.

Fuel Handling and Fire Prevention

Crucial safety rules for fuel handling and fire prevention.

Battery and Engine Safety Procedures

Refueling and Spill Handling

Procedures for refueling and handling spills.

Electrical and Battery Hazard Warnings

Warnings about electric shock and battery hazards.

Engine Exhaust and Ventilation Safety

Engine exhaust ventilation warning and safety.

Assembly and Initial Setup

Pre-Assembly Safety Review

Mandatory safety review before assembly.

Operating the Rider Mower

Pre-Operation Safety Verification

Mandatory safety review before operation.

Safety Interlock System Testing

Explanation and testing of safety interlock system.

Mower Operation Details and Procedures

Routine Maintenance Schedule

Pre-Maintenance Safety Review

Mandatory safety review before maintenance.

Safety Interlock System Check

Procedure to check the safety interlock system.

Scheduled Maintenance Tasks

Service and Adjustments

Pre-Service Safety Review

Mandatory safety review before service.

Mower Deck Leveling Procedure

Mower Deck Pitch Adjustment

Mower Blade Replacement

Blade Safety Caution

Warning about sharp mower blades.

Blade Sharpening and Roller Adjustment

Blade Sharpening Guidelines

Warning against sharpening blade on unit and recommended practice.

Battery Servicing Procedures

Battery Component Health Warning

Health warning for battery components.

Battery Care and Wheel Alignment

Belt Replacement Procedures

PTO Belt Removal Caution

Caution regarding idler spring tension during PTO belt removal.

PTO and Mower Belt Replacement

Troubleshooting Engine Problems

Engine Fails to Start or Runs Rough

Troubleshooting steps for engine starting and running issues.

Troubleshooting Unit Performance

Gravely Limited Warranty Information

Gravely 927060-1028 Specifications

General IconGeneral
BrandGravely
Model927060-1028
CategoryLawn Mower
LanguageEnglish

Related product manuals