EasyManua.ls Logo

Gravely 991160 - User Manual

Gravely 991160
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
991152 – ZT HD 48
(SN 040000 +)
991154 – ZT HD 52
(SN 040000 +)
991156 – ZT HD 60
(SN 040000 +)
Operator’s Manual
Manuel de I’utilisateur
ZT HD
Pro-Turn Z / ZX
09160000A 6/20
Printed in USA
E10
ENGLISH
FRANÇAIS
991160 – ZT HD 44
(SN 040000 +)
991162 – ZT HD 48
(SN 040000 +)
991164 – ZT HD 52
(SN 040000 +)
991166 – ZT HD 60
(SN 040000 +)
991192 – Pro-Turn Z 48
(SN 040000 +)
991194 – Pro-Turn Z 52
(SN 040000 +)
991196 – Pro-Turn Z 60
(SN 040000 +)
991230 – Pro-Turn ZX 48
(SN 040000 +)
991232 – Pro-Turn ZX 52
(SN 040000 +)
991234 – Pro-Turn ZX 60
(SN 040000 +)
Models

Questions and Answers

  • J
    Jacob EricksonAug 15, 2025
    What to do if my Gravely 991160 won't drive?
    • L
      Lisa RiveraAug 16, 2025
      If your Gravely Lawn Mower does not drive, make sure that the transaxles are engaged by their levers. If the levers are engaged, but the unit still doesn't drive, the transaxle drive belt may be faulty, or the transaxles themselves may be faulty, in which case you should contact your Gravely dealer.
  • S
    Steven WallAug 18, 2025
    How to fix a Gravely 991160 Lawn Mower that does not drive straight?
    • S
      Samantha ParkAug 18, 2025
      If your Gravely Lawn Mower does not drive straight, it could be due to incorrect tire pressure, so check the tire pressure. Also, the steering levers may need adjustment.
  • J
    James HuntAug 21, 2025
    How to troubleshoot a Gravely 991160 when the engine does not start?
    • J
      James HarrisonAug 21, 2025
      If your Gravely Lawn Mower engine doesn't start, several factors could be the cause. First, make sure the Safety Interlock System is properly engaged and not faulty. If the fuel tank is empty, refill it. Contaminated fuel can also prevent starting, so replace it with clean fuel. A discharged battery will also prevent the engine from starting, so charge the battery. Also, check the connection between the battery and cables, and tighten or clean them if necessary. Loose spark plug wires or faulty spark plugs can also be the problem; connect the wires or replace the spark plugs. If these steps don't resolve the issue, there may be a fault in the electrical system or the engine itself, in which case you should contact your Gravely dealer.
  • J
    James HarrisAug 25, 2025
    Why is the cutting quality poor on my Gravely Lawn Mower?
    • S
      Susan WilsonAug 25, 2025
      If your Gravely Lawn Mower exhibits poor cutting quality, several factors could be responsible. Ensure the mower blades are level and the mower deck pitch is correct. Dull or faulty mower blades can also cause this issue, so sharpen or replace them. If you're mowing too fast, try slowing down. Poor belt tension or condition can also affect cutting quality, so replace the mower belts if needed. Avoid setting the cutting height too low; for very tall grass, consider mowing twice.
  • C
    carol45Aug 27, 2025
    What to do if my Gravely 991160 engine runs rough?
    • A
      Alexander RobertsAug 27, 2025
      If the engine of your Gravely Lawn Mower runs rough, the choke control knob might be in the 'on' position. If so, move the knob to the 'off' position. Additionally, a plugged air filter cartridge could be the cause, so clean or replace it. If neither of these solutions resolves the issue, the engine itself may be faulty, and you should contact your Gravely dealer.
  • M
    Matthew Ruiz PhDAug 30, 2025
    Why does my Gravely 991160 Lawn Mower engine overheat?
    • P
      pennygonzalezAug 30, 2025
      If your Gravely Lawn Mower is overheating, it might be due to a low engine oil level, so add engine oil. Another potential cause is plugged cooling fins, so clean the engine. If the problem persists, the engine itself may be faulty, and you should contact your Gravely dealer.
  • M
    Marilyn AcostaSep 2, 2025
    Why is the PTO malfunctioning on my Gravely Lawn Mower?
    • S
      stephenserikaSep 3, 2025
      If the PTO on your Gravely Lawn Mower malfunctions, first ensure the operator presence switch is activated by sitting on the operator seat. If the switch is engaged and the PTO still malfunctions, the operator presence switch may be faulty. Also, the PTO belt might be faulty and needs replacement. If these steps don't resolve the issue, the PTO switch, wiring, connectors, or clutch could be faulty, and you should contact your Gravely dealer.
  • E
    Eric SchneiderSep 5, 2025
    What causes my Gravely 991160 Lawn Mower to move when the engine is off and the parking brake is on?
    • J
      Jessica WareSep 6, 2025
      If your Gravely Lawn Mower moves with the engine off and the parking brake engaged, it may be that the parking brake needs adjustment. If adjusting the lever doesn't solve the problem, the parking brake itself may be faulty, and you should contact your Gravely dealer.
  • S
    Stephanie WoodsSep 8, 2025
    Why does my Gravely Lawn Mower creep when the steering levers are in neutral?
    • D
      Debra AllenSep 9, 2025
      If your Gravely Lawn Mower creeps when the steering levers are in the neutral position, the transmission and/or linkage may need adjustment, and you should contact your Gravely dealer.
  • O
    oliverhowardSep 12, 2025
    What to do if blades do not stop within 5 seconds on Gravely Lawn Mower?
    • L
      Leslie SharpSep 12, 2025
      If the blades on your Gravely Lawn Mower do not stop within 5 seconds, it indicates that the clutch brake plates are worn. Try reversing the clutch brake plates. If they have already been reversed, replace the clutch.

Gravely 991160 Specifications

General IconGeneral
BrandGravely
Model991160
CategoryLawn Mower
LanguageEnglish

Related product manuals