Gravely Pro-Turn 991203 User Manual

E10
Owner/Operator Manual
Manuel Du Propriétaire/Utilisateur
Models
991200 – Pro-Turn 48
(SN 020000 +)
991201 – Pro-Turn 52
(SN 020000 +)
991202 – Pro-Turn 60
(SN 020000 +)
991203 – Pro-Turn 60
(SN 020000 +)
991204 – Pro-Turn 48 CARB
(SN 020000 +)
991205 – Pro-Turn 52 CARB
(SN 020000 +)
991206 – Pro-Turn 60 CARB
(SN 020000 +)
Pro-Turn
04519000A 10/12
Printed in USA
ENGLISH
FRANÇAIS
The use of any gasoline exceeding 10% ethanol (E10) or
10% MTBE will void the product warranty.
L’utilisation d’une essence contenant plus de 10% d’éthanol
(E10) ou de 10% de MTBE annulent la garantie.
™

Gravely Pro-Turn 991203 Specifications

General

Engine	Kawasaki FX850V
Horsepower	27 HP
Cutting Width	60 inches
Transmission	Hydro-Gear ZT-5400
Spindle Material	Cast Iron
Blade Tip Speed	18, 500 FPM
Cutting Height	1.0 - 5.5 inches
Turning Radius	Zero Turn
Deck Type	Fabricated
Speed	13 mph

Summary

REQUIRED OPERATOR TRAINING

SAFETY

SIGNAL WORDS AND DECALS

Explanation of safety alert symbols, signal words, and machine decals.

SAFETY HAZARDS

DANGER! HAZARDS

Details specific DANGER hazards like Amputation and Discharge.

MORE SAFETY HAZARDS

TIPPING AND SERVICE HAZARDS

Details specific hazards like Tipping, Service, Bystander, and Loss of Traction.

OPERATIONAL SAFETY WARNINGS

DANGER/CAUTION WARNINGS

Details specific DANGER and CAUTION warnings related to hot surfaces, rotating parts, and ROPS.

ROPS AND OPERATOR SAFETY

ROPS AND OPERATOR SAFETY

Details warnings for ROPS rollover, safety rules, operator age, and children.

PERSONAL PROTECTION

BEFORE OPERATING CHECKS

GENERAL OPERATION SAFETY

SLOPE OPERATION SAFETY

SLOPE OPERATION GUIDELINES

Critical safety instructions for operating the unit on slopes.

FUEL HANDLING AND SAFETY

ROPS AND SERVICE

ROPS INSPECTION AND USE

GENERAL SERVICE PROCEDURES

GENERAL SERVICE PROCEDURES

TRANSPORTING AND STORAGE

ASSEMBLY

UNIT ASSEMBLY AND PREPARATION

Steps for unpacking, assembling the unit, and initial preparation checks.

CONTROLS AND FEATURES

STEERING AND IGNITION CONTROLS

THROTTLE, LIFT, PTO, AND BRAKE CONTROLS

SEAT ADJUSTMENTS AND HOUR METER

FILLING FUEL TANK

FUELING PROCEDURE AND GASOLINE GUIDELINES

PRE-START CHECKS AND OPERATION

SYSTEM CHECKS AND CUTTING HEIGHT

Essential pre-start checks for safety systems, fluids, tires, and setting cutting height.

STARTING, SHUTDOWN, AND EMERGENCY STOP

How to start, stop, and react to emergencies.

MOWING AND PARKING PROCEDURES

MAINTENANCE SCHEDULE

EACH USE MAINTENANCE

Checks to perform before or after each use, including safety systems and tires.

PERIODIC MAINTENANCE TASKS

SERVICE AND ADJUSTMENTS

SERVICE POSITION AND HYDRAULIC FLUID

HYDRAULIC SYSTEM MAINTENANCE

MOWER BLADES AND BATTERY SERVICE

Maintenance for mower blades, including removal, replacement, and sharpening.

LUBRICATION AND STEERING ADJUSTMENT

LEVER AND TRACK ADJUSTMENTS

STEERING HANDLE HEIGHT AND BRAKE ADJUSTMENT

BELT REPLACEMENT AND DECK ADJUSTMENTS

DECK INSTALLATION AND LIFT ASSIST

Steps for installing the mower deck and adjusting lift assist springs.

DECK LEVELING AND BLADE HEIGHT

Steps for leveling the mower deck and adjusting blade height.

CLUTCH ADJUSTMENT

STORAGE PROCEDURES

SPECIFICATIONS

MODEL AND DIMENSIONAL SPECIFICATIONS

WARRANTY INFORMATION

COMMERCIAL EQUIPMENT WARRANTY

WARRANTY EXCEPTIONS AND LIMITATIONS