EasyManua.ls Logo

Gravely pro-turn 460 diesel 992236 User Manual

Gravely pro-turn 460 diesel 992236
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator’s Manual
Manuel du I’utilisateur
Pro-Turn
400 Diesel
04887100 9/15
Printed in USA
ENGLISH
FRANÇAIS
Models
992236 – Pro-Turn 460 Diesel
(SN 050,000 +)
992240 – Pro-Turn 472 Diesel
(SN 050,000 +)

Questions and Answers:

Gravely pro-turn 460 diesel 992236 Specifications

General IconGeneral
Engine TypeDiesel
Horsepower24.8 hp
Cutting Width60 inches
TransmissionHydro-Gear ZT-5400
Turning RadiusZero-turn
Tire Size Rear26 x 12-12
Displacement1, 267 cc
Deck TypeFabricated
Standard FeaturesSuspension Seat

Summary

INTRODUCTION

THE MANUAL

Read and understand manuals for safety, controls, and maintenance.

ENGINE MANUAL

Manual for the engine specific to the unit.

SERVICE AND REPLACEMENT PARTS

Know model/serial numbers when ordering parts or making inquiries.

PRODUCT REGISTRATION

Dealer must register product for warranty and service info.

SAFETY

SIGNAL WORDS

Explains safety alert symbols and signal words used in the manual.

SAFETY DECALS

Explains the purpose of safety decals on the machine.

ASSEMBLY

UNIT ASSEMBLY

Steps for unpacking and assembling the unit.

PREPARATION CHECKLIST

List of checks before operating the unit.

PREPARE SEAT

Instructions for preparing the seat assembly.

CONTROLS AND FEATURES

OPERATOR CONTROLS OVERVIEW

Identifies key controls and features of the unit.

IGNITION AND INDICATOR LIGHTS

Controls engine start/stop and displays system status.

OPERATION

SAFETY INTERLOCK SYSTEM

Ensures unit only operates when safety conditions are met.

STARTING AND SHUT OFF

Procedures for starting and stopping the engine.

MOWING OPERATION

Steps for engaging the mower and operating the unit.

PARKING

Procedures for parking the unit safely.

MAINTENANCE SCHEDULE

EACH USE MAINTENANCE

Tasks to perform before or after each use.

HOURLY MAINTENANCE

Tasks based on operating hours (25, 50, 100).

PERIODIC MAINTENANCE

Tasks for longer intervals (400, 500 hours).

SERVICE AND ADJUSTMENTS

SERVICE POSITION

Procedure to place the unit in a service-ready position.

CHECK AND CHANGE HYDRAULIC FLUID

Procedures for checking and changing hydraulic fluid.

MOWER BLADE SERVICE

Instructions for removing, sharpening, and replacing mower blades.

ELECTRICAL SERVICE

REPLACING FUSES AND RELAYS

Procedures for replacing fuses and relays in the fuse box.

STEERING CONTROL NEUTRAL ADJUSTMENT

Adjusting steering linkages for proper neutral alignment.

STORAGE

SHORT TERM STORAGE

Guidelines for storing the unit for short periods.

LONG TERM STORAGE

Procedures for preparing and storing the unit for extended periods.

FUEL SYSTEM STORAGE PREP

Preparing the fuel system for storage to prevent deterioration.

TROUBLESHOOTING

ENGINE PROBLEMS

Addresses issues like engine not cranking or starting.

OPERATIONAL PROBLEMS

Addresses issues with PTO, blades, or unit movement.

SPECIFICATIONS

MODEL AND ENGINE SPECS

Details on model, engine, displacement, and speed.

DIMENSIONS AND WEIGHT

Specifications for size, weight, tires, and deck.

WARRANTY

WARRANTY COVERAGE

Details on warranty periods for different product groups.

WARRANTY EXCEPTIONS AND LIMITATIONS

Exclusions, limitations, and customer responsibilities for warranty.

Related product manuals