7 - 27
Mower Spindle Removal
1. With the mower deck removed from the unit the
spindle can be removed.
2. Loosen the idler arms and remove belts from
spindle sheaves.
3. Remove mower blades.
4. Unscrew nuts at top of spindle. Remove pulleys.
Inspect shaft and woodruff key for wear.
5. Unbolt and remove housing from deck.
6. Install spindle in reverse order. Apply grease to
fitting on spindle.
Figure 15
1. Mower Mounting Arm
2. Mower Mounting Pin
PF2040
1
2
1
2
1
2
50" Deck
60" Deck
Promaster 200
CAUTION: Mower blades may be sharp. Use
gloves or heavy padding to grip the blades.
To Next Page
Loading...
