Chapter Topics
Book Topics
GrIP User’s Guide
15-Pin Joystick Won’t Work with MultiPort
I plugged my old joystick into one of the MultiPort’s 15-pin connectors, but it’s
not working. Why not?
You probably forgot to switch the MultiPort‘s Mode Selector switch
into Pass-Thru Mode. Make sure the Mode Selector is switched towards
the two 15-pin Pass-Thru connectors to allow your 15-pin controllers to
work through the MultiPort. Make sure that the green LED on the
Pass-Thru wing is lit.
Also, make sure that you have selected the correct joystick description
in your game‘s Setup. Choose ”Joystick“ or a more specific description
of your joystick—not ”Gravis GrIP“—if you are using the MultiPort
with a standard controller in Pass-Thru Mode.
To Next Page
Loading...