allow to dry all the components at a shady place before assembly
lubricate ONLY with YNX grease, as illustrated in figure 7.
MK II - Figure 7, Lubrication Chart
Caution: all the components must be grease only with YNX grease. Any other kind of oils and greases may
burn or explode in contact with a pure oxygen flow
Biennial Maintenance
Test the cylinder
Overhaul the shut-off valve (manufacturer workshop)
Overhaul (Every Four Years)
Major overhaul of complete rebreather (manufacturer workshop)
MK II Oxygen Rebreather User Manual - Revision 01/2018 - Copyrights : Dr Fabrizio Pirrello © 2001- 2018
To Next Page
Loading...