Gravity Zero MK II - Repairs; Breathing Bag Repair; Hose Repair

To Next Page

To Previous Page

Breathingh Bag Repair

Material and tools required:

 emery cloth grain size 100*

 Aquasure adhesive*

 brush*

 cleaning gasoline

 poliurethane rubber patch*

 punches and scissor

a) inflate the rebreathing bag, locate and mark the damaged area

b) roughen with emery cloth

c) clean with gasoline and let dry for fifteen minute about

d) roughen and clean the patch

e) coat with Aquasure adhesive the surfaces of patch and breathing bag

Caution: Aquasure adhesive contains toluene. Use only in well ventilated area. Avoid prolonged breathing of

vapors do not use near heat or flames. Do not ingest. If swallowed do not induce vomiting. Seek

medical aid immediately. Avoid contact with skin or eyes. Keep out of reach of children.

f) place patch in position and press on firmly

g) complete hardening takes place after one day.

h) test repair prior to use

Hoses Repair

Material and tools required:

 Aquasure adhesive*

 emery cloth grain size 100*

 brush*

 cleaning gasolin

a) locate the puncture on the damaged hose

b) roughen with emery cloth

c) clean with gasoline and let dry for fifteen minute about

d) coat with Aquasure adhesive the surface roughened with a thickness of about 1,5 mm

e) complete hardening takes place after one day.

f) test repair prior to use