GRAVITY GMAMH01 User Manual

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ
-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Large, convenient attachment screw knob
Captive mic clip mount screw
Made of hard wearing powder coated steel
Interchangeable colour rings
INTRODUCTION
Made of black powder coated steel, the Gravity MAMH 01 clamps on to microphone
or music stand poles with up to 30 mm diameter. It features a permanently attached
3/8“ mic clip mount screw (mic clip not included).
SPECIFICATIONS
Product type: microphone holder
Length: 160 mm
For tube diameter: up to 30mm
Thread: 3/8"
Material: steel
Colour: black
Surface: powder coated
Weight: 0.14 kg
Black ring pack included: yes
GMAMH01
Microphone Holder

GRAVITY GMAMH01 Specifications

General

Brand	GRAVITY
Model	GMAMH01
Category	Racks & Stands
Language	English

Summary

Safety Information

General Safety Instructions

Read instructions, keep them safe, follow warnings, be attentive, use indoors only, avoid modification, comply with disposal laws, keep bags from children.

Manufacturer's Warranty and Liability

Warranty and Contact Information

Find warranty conditions online and contact Adam Hall GmbH for service requests via mail or phone.

Product Features

Key Features

Large attachment screw knob, captive mic clip screw, durable powder coated steel, and interchangeable colour rings.

Product Introduction

Clamp Description

Clamps onto mic or music stand poles up to 30mm, made of black powder coated steel with a permanently attached 3/8" screw.

Product Specifications

Technical Specifications

Details product type, length, tube diameter, thread, material, surface finish, weight, and included accessories.