GRAVITY KSX 1 User Manual

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Solid and durable construction
Ergonomic handling
Reinforced joints
Interchangeable colour rings
INTRODUCTION
The KSX 1 is a hardwearing single brace X-style keyboard stand with 55 kg load
capacity. A quick release clamping lever provides easy adjustment with a maximum
height of 90 cm. The powder coated steel construction features reinforced joints for
superior durability and long lasting non-slip end caps.
SPECIFICATIONS
Product type: Keyboard stand
Material: steel
Surface: powder-coated
Colour: black
Construction: X stand
Lock: clamping
Number of supports: 1
Max. support depth: 400 mm
Min. height: 100 mm
Max. height: 900 mm
Max. load: 55 kg
Weight: 2.98 kg
Black ring set included: yes
GKSX1
Keyboard Stand X-Form single
Black rings and
pads included

GRAVITY KSX 1 Specifications

General

Type	Keyboard stand
Material	Steel
Colour	Black
Height Adjustment	Yes
Width Adjustment	No
Foldable	Yes
Depth	450 mm
Weight Capacity	65 kg

Summary

Safety Information

Manufacturer's Warranty & Limitation of Liability

Proper Disposal of Product

Features

Introduction

Specifications

Product Type

Identifies the item as a keyboard stand.

Material

Specifies the material used for the stand's construction.

Surface Finish

Details the surface treatment applied to the stand.

Colour

Indicates the color of the keyboard stand.

Construction Type

Defines the structural design as an X stand.

Lock Mechanism

Describes the type of locking system used for adjustments.

Maximum Support Depth

Specifies the maximum depth the stand can support.

Minimum Height

States the lowest adjustable height of the stand.

Maximum Height

States the highest adjustable height of the stand.

Maximum Load Capacity

Indicates the maximum weight the stand can safely hold.

Weight

Provides the total weight of the keyboard stand.

Black Ring Set Included

Confirms the inclusion of a black ring set with the product.