26
USER MANUAL
GRAVITY Xfusion
EN REV.V01 - 2020
31. Fold the cover sheet to the right, push the black rubber through the eye of cover of the container.
32. The Xfusion is now ready for installation into the harness or the external container. The connection of the
Xfusion to the harness shall be made due following the recommendations the harness manufacturer (harness
manual).
PLEASE NOTE _
The riser of the Xfusion should be connected to the suspension point of the harness.
For the connection of the handle there are three loops on the outside face of the inner container.
To Next Page
Loading...