To Next PageTo Next Page
Need help?Do you have a question about the GRAVOGRAPH IS6000 and is the answer not in the manual?
Details compliance with EC marking and EEC directives for safety, EMC, and low voltage.
Covers fuse compliance, voltage levels, Class 1 material, and mains plug connection requirements.
States conformity with EN ISO12100-1 and EN ISO12100-2 standards for machine safety.
Lists compliance with EN 55022, EN 61000-3-2/3, and EN 61000-6-2 EMC norms.
Identifies key components like cover, main body, and chip entry, and their security levels.
Step-by-step guide to attach the suction tube to the machine and collector.
Instructions for connecting the input/output cable and mains cable to the machine.
Details how to configure the machine for automatic control of the chips collector.
General safety advice, warnings about dry chips, and protective gear for maintenance.
Steps to power on the machine and collector, prepare work, and start engraving.
Procedure for safely removing and emptying the chip collection bag, including safety gear.
Guide on how to safely replace the fuse in the device.
Details dimensions, weight, and packaging of the chips collector.
Specifies air flow, static pressure, and turbine type for the chips collector.
Details input voltage, current, frequency, power, protection type, and insulation.
Lists switch, I/O, tube, vacuum nose specifications, sound, and environment data.
General| Brand | GRAVOGRAPH |
|---|---|
| Model | IS6000 |
| Category | Industrial Equipment |
| Language | English |
