GRAVOGRAPH IS8000 - User Manual

Guide d'utilisation
User guide
Bedienungsanweisung
IS
Aspirateur de copeaux
Chips collector
Absaugvorrichtung
A lire en priorité
Please read carefully before use
Vor Inbetriebnahme zu lesen
F1646 799 - 12.2007 - FED - (INDICE DE REVISION : 1)
(UPDATED EDITION NUMBER: 1)
(NEUFASSUNG NUMMER : 1)

Summary

Information about regulations

Conformity standards

Hardware designed and built according to EC marking and EEC directives.

Machine security

Electromagnetic compatibility

Hardware conforms to EMC norms like EN 55022 and EN 61000-6-2.

Electrical security

Presentation

Installation of the chips collector IS on old machines IS400, IS6000, IS7000 and IS8000

Description

Chips collector assembly

Installation

Mounting the suction tube

Steps to remove existing nose, slide suction tube, pass through trap door, install new nose.

Connecting the chips collector

Configuration of the machine

Machines GravoTech M20;M40

Program VACUUM CLEANER function via engraving software.

IS machines

Define Inputs/Outputs in Postprocessor and activate "AUTOMATE" function.

Procedure to modify the postprocessor

Procedure to activate the AUTOMATE function

Steps to activate the firmware "AUTOMATE" function via the machine's control panel.

Instructions for use

Precautions for use

Read chapter carefully before using the chips collector; respect machine contraindications.

Launching the engraving

General maintenance

Emptying the chips collector bag

Changing the fuse

Technical characteristics

Physical characteristics

Performances

Electrical characteristics

GRAVOGRAPH IS8000 Specifications

General

Brand	GRAVOGRAPH
Model	IS8000
Category	Industrial Equipment
Language	English